Drying Guide · Grain

Mechanical Grain & Paddy Drying

In humid climates, grain left on the floor loses 10-30% of its value to mold, insects and sprouting. Mechanical drying converts that loss into sellable grade – and pays back in one or two seasons.

Target 12-14%Temp 40-60°CKey temperingLoss cut 10-30%
Quick Answer

Dry paddy and grain to 12-14% moisture in staged passes at 40-60°C, with tempering rest between passes. Drying grain too fast cracks the kernel (fissuring) and downgrades the milling yield – the tempering stage matters as much as the heat.

Batch tray/trolley systems and continuous belt dryers both serve grain programs; belt systems with volumetric feed suit cooperative-scale and commercial operations.

12-14%safe storage moisture
40-60°Ckernel-safe air temperature
Temperingrest between passes prevents cracks
1-2 seasonstypical payback from loss recovery
Working principle diagram of a heat pump drying room with heat recovery
Continuous mesh belt drying machine installed in a customer factory
Heat pump food drying equipment loaded with fruit and vegetables
Why Grain Cracks

The Tempering Rule

Rice and maize kernels are moisture-gradient sensitive: fast hot drying makes the shell shrink around a wet core, and the kernel fissures. Fissured rice breaks in milling and sells as brokens at half price.

Industrial practice: dry 1-2 percentage points of moisture per pass, then rest (temper) 4-12 hours so internal moisture equalizes, then repeat. Automated dryers run these pass-rest cycles on a PLC recipe.

Profiles

Targets by Grain

Grain Air temp Target moisture Notes
Paddy (rice) 45-60°C 12-14% Temper between passes; gentle = higher head-rice yield
Maize 50-80°C 13-14% Tolerates hotter air than paddy
Wheat 50-70°C 12-13% Watch sprout damage in wet harvests
Soybean 40-50°C 11-13% Oil seeds are the most heat-sensitive
Machine Choice

Options by Operation Size

Tray/trolley ovens

Cooperative scale; doubles for horticulture between seasons.

Belt dryers

Continuous drying at commercial scale with gentle multi-zone control.

Heat pump heating

Cuts drying energy 60-75% where electricity powers the line.

Get a Custom Configuration

Tell Us Your Material and Capacity

  • Material and initial moisture content
  • Target capacity per hour or per batch
  • Local energy costs and power supply
  • Factory space available

Prefer email? Write to info@tondemachine.com or WhatsApp +86 185 0387 4173. Our engineers reply within one working day.

    FAQ

    Frequently Asked Questions

    What moisture is safe for grain storage?

    12-14% for most cereals in tropical conditions – combined with aeration and pest control. Grain stored above 15% molds.

    Does mechanical drying really pay back?

    In humid climates, post-harvest losses of 10-30% are common. Recovering even half of that on one season’s harvest typically covers a dryer’s cost within 1-2 seasons.

    Can the same machine dry grain and vegetables?

    A tray oven can, with dedicated batches and full cleaning. Belt dryers for grain usually stay dedicated because throughput profiles differ.